XIN

XIN module is a part of CATOFF MIX analog modular mixing system.

This module provides one input mono audio channel with gain control, aux sends controls, channel volume knob, panning knob and muting switch. In addition, there are two jumpers to choose between AUX pre/post level control for both AUX channels on the back side of the module. Еach module has side stacking connection to the XOT master module or to other XIN modules. A lot of XIN modules can be connected to each other and must be combined with one XOT master-module. XIN modules can’t be used without XOT module (sold separately or as a part of Complete Set). Thus, having connected XIN to XIN and finally to XOT, we get a stereo mixing console with as many input channels as we need.

Technical Specifications:

Frequency Response: 20Hz to 20kHz +/-0.5dB

THD – Total Harmonic Distortion (+4 dBu, 20 Hz–20 kHz, 10kΩ): <0.007%

Gain Range: -20db to +20db

Line Input Impedance: 10kΩ

Line Input Maximum Level: +22dBu

Power Usage (via XOT module): 15mA# +12v / 15mA# -12v

Controls & indicators:

Line INPUT 3.5mm (1/8″) Mono Socket

Peak Led (RED) +16dBu Peak Point

Signal Led (GREEN) 0dBu

GAIN Control

AUX1 Send Level Control

AUX2 Send Level Control

PAN Control

VOLUME Channel Control

MUTE Switch

MUTE Led Indicator (RED/GREEN)

AUX1 & AUX2 Pre/Post Jumper Switch (on the back side)

Width: 4HP

Depth: 35mm / from the back side of the front panel

2mm Aluminium Front Panel

Power bus socket is not required